Knowledgebase
Jakinid Support Website > Help Desk (Jakinid.com) > Knowledgebase

Search help:


How to enable the device's DDNS setting?

Solution

First of all,the client will need to sign up  a DDNS account e.g.No-IP.com .

After that,the client will have the below Login details to be entered into the device's DDNS page.

And then click [Submit] button to start the DDNS client program ,and  update the device's current public IP address to link with the Host Name that the client had applied . Once it is done,the device is ready to access via the signed up DDNS name.See the attached file as an example.

For example:

User name/Email: [email protected]

Password:actatek

Host name:actatek.no-ip.biz

 

 

Note:

Please make sure below.

-The device's IP setting is able to access the Internet.

-If the device was using private IP address (LAN),it will be required to setup the port-forwarding at the router setting. See the below link for more information

 http://setuprouter.com/

 

 Related article URL:

 http://www.jakinid.com/supportkb/knowledgebase.php?article=32

 

 

 

 

 

 

 
Was this article helpful? yes / no
Related articles How to enable the device's DDNS setting?
I had enable the device's DDNS setting correctly,but I still can not access the device via the signup DDNS host name. What should I do?
After enable device's DDNS, now we can access the device from internet .How will the device sync. with the AMS to push the data?
How to access ACTAtek4 from Internet?
Do you have any quick guide about how to install Access Manager Suite?
Article details
Article ID: 116
Category: ACTAtek4
Views: 8841
Rating (Votes): Article rated 3.4/5.0 (5)

 
« Go back

 
Powered by Help Desk Software HESK, in partnership with SysAid Technologies