Configure DDNS on ACTAtek
Dynamic DNS (DDNS) allows remote access to an ACTAtek device using a fixed host name, even when the public IP address at the ACTAtek device's location changes. This article shows how to enable the ACTAtek device's built-in DDNS client (example: No-IP.com), set up port forwarding on the router, configure the ACTAtek device's DDNS settings, and verify remote access.
Before you start
- Sign up for a DDNS account, e.g. No-IP.com, and create a host name.
- Make sure the device's network settings can reach the Internet.
- If the device uses a private (LAN) IP address, port forwarding must be set up on the router.
Example DDNS account details used in this article:
| Username/Email | your No-IP account e-mail |
| Password | your No-IP account password |
| Host Name | actatekdemo.ddns.net |
| Update interval | 600 seconds (default) |
Step 1: Enable DDNS on the ACTAtek device
- Log in to the device's web admin page as administrator.
- Go to Terminal Settings > DDNS (1).
- Set DDNS Service Provider to No-IP.com. Leave SSL as Disable .
- Enter the Username/Email, Password and Host Name of your DDNS account. Keep the Update interval at the default of 600 seconds.
- Click Submit (2). This starts the DDNS client, which updates the device's current public IP address against your host name.
- Click Refresh DDNS Status (3) to check the log. A line such as "Successful alias table update for <host name>" confirms the update worked; later entries showing "No IP# change detected" are normal.
Step 2: Set up port forwarding on the router
When the device sits behind a router on a private IP address, forward an external port to the device's HTTPS port (443). The example below forwards external port 444 to internal HTTPS port 443 of the device at 192.168.1.128. The screens differ between router brands, but the same values are needed.
| Setting | Example value |
|---|---|
| Service Name | ACTA4_DDNS |
| Device IP Address | 192.168.1.128 (the ACTAtek device's LAN IP) |
| External Port | 444 |
| Internal HTTPS Port | 443 |
| Protocol | All |
| Enable This Entry | Ticked |
Click Save, then confirm the entry shows as enabled in the Port Forwarding list.
Tip: give the ACTAtek device a fixed LAN IP address so the forwarding rule keeps pointing at the right ACTAtek device.
Step 3: Access the device from the Internet
From a network outside the site, open a browser and enter the host name and the external port as an example:
https://actatekdemo.ddns.net:444/
The device's Login page page should apprear.You can Login to ACTAtek device to see the admin page (Terminal Status) should appear. The browser may show a certificate warning because the device uses a self-signed certificate; confirm the address is correct and continue.
Notes
- Test remote access from outside the local network (e.g. a mobile data connection); some routers do not loop back to their own public address.
- If you are using a different external port, include the port number in the URL. For example: https://actatekdemo.ddns.net:444/
Related article: https://www.jakinid.com/supportkb/knowledgebase.php?article=281